RBI Monetary Policy Tools: Repo, CRR, SLR, OMOs and the MPC

How does the RBI change the cost and quantity of money? This guide explains inflation targeting, the Monetary Policy Committee, the repo–SDF–MSF corridor, CRR and SLR, open market operations, sterilisation, the money multiplier and the limits of monetary policy, along with the traps UPSC Prelims keeps testing.

  • 7 min read
  • 10 practice questions
  • 4 FAQs
A grand classical central bank building with tall columns at a city intersection in the morning
A grand classical central bank building with tall columns at a city intersection in the morning

How does the RBI change the cost and quantity of money?

Monetary policy is the use of interest rates and liquidity by a central bank to keep prices stable while supporting growth. In India, the Reserve Bank of India (RBI) does this through a set of instruments: some change the price of money (the policy repo rate and its corridor), and others change the quantity of money in the banking system (reserve ratios and open market operations). Prelims questions on this topic test whether an aspirant can tell which tool does what, and in which direction.

The RBI Act, 1934 was amended in 2016 to give monetary policy a statutory framework of flexible inflation targeting. The primary objective is price stability while keeping growth in mind. The inflation target is set by the Central Government in consultation with the RBI, once every five years, in terms of the Consumer Price Index (CPI). The target has been 4 per cent CPI inflation, with a tolerance band of 2 to 6 per cent.

FeatureMonetary Policy Committee
MembersSix: the RBI Governor (chairperson), the Deputy Governor in charge of monetary policy, one RBI officer nominated by the Central Board, and three external members appointed by the Central Government
Term of external membersFour years; not eligible for reappointment
MeetingsAt least four times a year; quorum of four
DecisionBy majority vote; the Governor has a second or casting vote in case of a tie
TransparencyMinutes, including each member's vote and statement, are published on the fourteenth day after the meeting
Main decisionThe policy repo rate and the policy stance

The MPC fails to meet its target if average CPI inflation stays above the upper tolerance level or below the lower tolerance level for three consecutive quarters. The RBI must then report to the Central Government the reasons for the failure, the remedial action proposed and the time within which the target will be restored. The Union Finance Minister is not part of the MPC.

Price instruments: the policy corridor

Under the Liquidity Adjustment Facility (LAF), the RBI lends to and borrows from banks at rates linked to the repo rate. These rates form a corridor that guides the overnight call money rate, the operating target of policy.

InstrumentWhat it doesPosition in the corridor
Policy repo rateRate at which the RBI lends to banks against government securities as collateralCentre; set by the MPC
Standing Deposit Facility (SDF)Allows the RBI to absorb surplus liquidity from banks without giving them securities in returnFloor: repo rate minus 25 basis points
Marginal Standing Facility (MSF)Emergency overnight borrowing by banks, including by dipping into their SLR securities up to a limitCeiling: repo rate plus 25 basis points
Bank RateRate at which the RBI rediscounts bills; used to calculate penal ratesAligned with the MSF rate
Fixed rate reverse repoAbsorbs liquidity against securities given by the RBIBelow the SDF; now of minor importance

The SDF was introduced in April 2022, using an amendment made to the RBI Act in 2018. Because it is collateral-free, the RBI can absorb large surpluses even when it does not hold enough government securities to give in exchange. That is why the SDF, rather than the reverse repo, now forms the floor of the corridor. Whenever the MPC changes the repo rate, the SDF and MSF rates move with it, keeping the corridor symmetric.

Since October 2019, banks have linked new floating-rate loans for retail borrowers and small enterprises to an external benchmark, such as the repo rate. This has made transmission of policy rate changes to borrowers faster than under earlier internal benchmarks.

Quantity instruments: reserves and open market operations

FeatureCash Reserve Ratio (CRR)Statutory Liquidity Ratio (SLR)
Legal basisSection 42 of the RBI Act, 1934Section 24 of the Banking Regulation Act, 1949
FormCash balances kept with the RBILiquid assets kept by the bank itself: cash, gold or unencumbered approved securities
InterestEarns no interestSecurities earn interest
BasePercentage of net demand and time liabilities (NDTL)Percentage of NDTL

A cut in the CRR releases lendable resources to banks directly and is a powerful liquidity tool. The SLR serves a prudential purpose, ensuring that banks hold liquid assets, and it also creates steady demand for government securities.

Open Market Operations (OMOs) are the purchase and sale of government securities by the RBI in the market. Purchases inject rupee liquidity; sales absorb it. OMOs are the main tool of sterilisation: when the RBI buys large foreign exchange inflows to prevent excessive rupee appreciation, it releases rupees into the system, and selling government securities absorbs that excess to keep inflation and interest rates in check. The RBI also uses variable rate repo and reverse repo auctions and foreign exchange swaps to fine-tune liquidity.

Money multiplier

Banks create deposits by lending, and the money multiplier measures how much broad money is generated per unit of reserve money. It rises when people keep a smaller share of their money as cash and more as bank deposits, that is, when banking habits spread. It falls when the CRR or SLR is raised or when banks hold more excess reserves, because less of each deposit is lent onward.

Qualitative tools

Beyond these quantitative tools, the RBI can use selective credit controls such as margin requirements on loans against particular commodities, moral suasion through persuasion of banks, and directions on lending to specific sectors.

Expansionary versus contractionary policy

InstrumentExpansionary (to support growth)Contractionary (to curb inflation)
Repo rateCutRaise
SDF and MSF ratesFall with the repo rateRise with the repo rate
CRR and SLRCutRaise
OMOsBuy government securitiesSell government securities

Common confusions and traps

  • "The Finance Minister chairs the MPC." Wrong; the RBI Governor chairs it, and the Government is not represented.
  • "The MPC has twelve members." Wrong; it has six.
  • "The reverse repo rate is the floor of the corridor." No longer; the SDF has been the floor since April 2022.
  • "CRR and SLR are both kept with the RBI." Wrong; CRR is cash with the RBI, while SLR assets are held by banks themselves.
  • "An expansionary policy would raise the MSF rate." Wrong; MSF moves with the repo rate, so easing lowers it.
  • "A higher CRR increases the money multiplier." Wrong; it reduces the multiplier.
  • "OMO sales are used to inject liquidity." Wrong; sales absorb liquidity, purchases inject it.

How the theme appears in UPSC Prelims

UPSC Prelims tests this area through both direct and reasoning-based questions. Past papers have asked about the composition and chairmanship of the MPC (2017), which measures an expansionary monetary policy would not involve (2020), what increases the money multiplier (2019 and 2021), which RBI activity counts as sterilisation (2023), whether non-banking financial companies can access the LAF window (2024), and why central banks raise interest rates to fight inflation (2023). A clear grasp of the direction in which each tool moves solves most of these.

Limits of monetary policy

  • Lags: a change in the policy rate takes several quarters to work through bank lending rates, demand and prices, so the MPC must act on forecasts rather than current inflation alone.
  • Supply shocks: inflation caused by a poor monsoon, food supply disruptions or a rise in global fuel prices responds only partly to higher interest rates; supply-side measures by the government are also needed.
  • Transmission gaps: if banks are slow to pass on rate changes, or a large share of credit is outside the formal system, policy has a weaker effect.
  • Global spillovers: tight monetary policy in advanced economies can pull capital out of emerging markets, weakening their currencies and constraining their own interest rate choices.

Quick revision points

  • Flexible inflation targeting since 2016: 4 per cent CPI, band of 2 to 6 per cent, set by the Central Government with the RBI every five years.
  • MPC: six members, Governor chairs with a casting vote, three external members for four years without reappointment.
  • Failure: inflation outside the band for three consecutive quarters; RBI reports reasons and remedies to the Government.
  • Corridor: SDF (floor, repo minus 25 bp), repo (centre), MSF and Bank Rate (ceiling, repo plus 25 bp).
  • CRR: cash with the RBI, no interest; SLR: liquid assets held by banks; both on NDTL.
  • OMO purchases inject liquidity; sales absorb it and are used for sterilisation.
  • Limits: policy lags, supply shocks, weak transmission and global spillovers.

Practise next: Attempt related MCQs and revise quick notes on this topic in the IASLadder app.

Practicing UPSC Prelims PYQs?

Practice 45+ years of topic-wise previous year questions (1979–2026) with in-depth explanations on our mobile app.

Never miss a daily update

Join our official Telegram channel or WhatsApp group for daily current affairs and test alerts.

Frequently Asked Questions

The repo rate is the rate at which the RBI lends overnight to banks against government securities, and it is set by the Monetary Policy Committee. The Standing Deposit Facility rate is what the RBI pays banks for parking surplus funds with it, without collateral. It is kept 25 basis points below the repo rate.

Under the reverse repo, the RBI must give government securities to banks in return for their surplus funds, which limits how much liquidity it can absorb. The Standing Deposit Facility, enabled by a 2018 amendment to the RBI Act, needs no collateral, so the RBI can absorb large surpluses. It became the floor of the policy corridor.

The Cash Reserve Ratio is the share of net demand and time liabilities that banks must keep as cash balances with the RBI, earning no interest. The Statutory Liquidity Ratio is the share that banks must hold themselves in cash, gold or unencumbered approved securities, which earn interest and also create steady demand for government bonds.

Failure occurs when average CPI inflation stays above 6 per cent or below 2 per cent for three consecutive quarters. The RBI must then send a report to the Central Government explaining why the target was missed, what remedial action it proposes, and the time within which it expects inflation to return to the target.

Test yourself · 10 practice questions

Practice MCQs on RBI Monetary Policy Tools: Repo, CRR, SLR, OMOs and the MPC

Check how well you understood this article with 10 UPSC-style multiple-choice questions — instant answers with detailed explanations.

View all questions with answers

Tags

Keep reading

More in Optional & Subjects

View all
  1. Optional & Subjects Protected Areas in India: National Parks, Sanctuaries and Reserves 10 min read
  2. Optional & Subjects Temple Architecture: Nagara, Dravida and Vesara Styles 9 min read
  3. Optional & Subjects Groundwater and Aquifers: Recharge, Pumping and Water Security 9 min read
  4. Optional & Subjects Balance of Payments: Current Account, Capital Flows and Reserves 9 min read
  5. Optional & Subjects Colonial Land Revenue: Permanent, Ryotwari and Mahalwari 9 min read
  6. Optional & Subjects Constitutional Writs: Articles 32 and 226 Explained 8 min read